Dicas TopSolid - Página 2 de 4

TopSolid'Cam 7 Hint #149

In 7.9, it's now possible to display the machine in position when you create a tool path. All the previous movements are taken account. On this example, this is the second spindle which is been use to support the part (movement made by a virtual jog before) but it could be steady, turrets or machines elements. It's both available in turning and in milling. In 7.10, it will be available every time, no need to go to WCS menu….

Leia MaisTopSolid'Cam 7 Hint #149

TopSolid'Sheetmetal Hint #147

As standard in TopSolid’Sheetmetal application you benefit of a task manager. This task manager allows you to save a considerable time in the treatment of the parts you have to produce. Using this hint, you will be able to : Centralize the dataThrow automatically parts to be produced according to various selection criteriaGenerate in automatic the nestingFollow the realized ordersManage the wastesEdit operators cards

Leia MaisTopSolid'Sheetmetal Hint #147

TopSolid'Cam Hint #146

In TopSolid’Cam, there is an option which allows you to cut a 3D path according to the tool length.  By using 3D in operation manager and “tool length management”, there are two possibilities : either it is possible to trim the path to the accessible area with the tool’s characteristics, either it is possible to select more tools to cut the path according to each tool length. The benefit is to have the best rigidity as possible, like that, we have a better quality.

Leia MaisTopSolid'Cam Hint #146

TopSolid'SheetMetal Hint #145

TopSolid'SheetMetal 2014 includes a new function for laser cutting. In the case of "low head" cutting operations which could potentially be dangerous the operator can automatically work around these to avoid all danger. 

Leia MaisTopSolid'SheetMetal Hint #145

TopSolid'Wood Hint #144

The sub slope driver block for interior design

Leia MaisTopSolid'Wood Hint #144

TopSolid'Cam 7 Hint #143

TopSolid'Cam has very powerful tools to store and standardize your company know-how. Thanks to its methods which are easily generated from an existing machining sequence you can apply your parameters to all other parts. The drag and drop of a method allows you to carry this out. In fact the method adapts itself to the new topology and it is very easy to change the tool paths generated and to update the existing method.

Leia MaisTopSolid'Cam 7 Hint #143

TopSolid'Wood Hint #142

User machining as component tools

Leia MaisTopSolid'Wood Hint #142

TopSolid'Design 7 Hint #141

How to define an automatic naming of documents.

Leia MaisTopSolid'Design 7 Hint #141

TopSolid'Cam 7 Hint #140

Thread milling operations management.

Leia MaisTopSolid'Cam 7 Hint #140

TopSolid'Progress Hint #139

Redefining the unstamping area boundary edges

Leia MaisTopSolid'Progress Hint #139